ADVANTAGES

• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified

ADVANTAGES

• Protection rating IP65
• With short-circuit, over-voltage, under-voltage protection
• Automatically closing
• Surge protection
• Disconnect obliviously，Repair directly in box when repair power issue
• With metering installation location to visualize power

Main function

from Break the overload and short-circuit current generated by the current feedback, to protect solar photovoltaic device.

Application

Suitable for photovoltaic systems below 1500VDC.

Main function

When a surge overvoltage occurs in the circuit due to a lightning strike or other reasons,the protector will be turned on immediately within nanoseconds, and the surge overvoltage will be introduced into the ground to protect the electrical equipment on the grid

Application

Suitable for circuits below 1500VDC
cabinet/combiner box/photovoltaic system

DC Circuit Breaker 1500V

• Model Number:SL7N-63H
• Certification：TVU、CE
• Rated voltage：DC1500V
• Short-circuit breaking capacity：6KA
• Poles: 2P/4P
• Rated current:10A/25A/25A/32A/40A

ADVANTAGES

• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified

Main function

SL7N-40H with overload delay protection, short circuit instantaneous protection, provide short-circuit protection,overload protection from the 1500VDC.

Application

Widely used in DC panel, DC distribution cabinet, DC combiner box, energy storage, photovoltaic, wind power station distribution box system, communication distribution box protection system, and can also be used for infrequent on-off conversion of lines under normal conditions.

Application

The Cooper suntree three-module photovoltaic Surge Protective Device (SPD) (with three-step DC switching device) features visual indication and optional remote contact signaling (floating changeover contact) for use in PV systems. These complete surge protective devices are suitable for all PV systems in accordance with IEC 60364-7-712. Includes a five year limited warranty.

These pre-wired solutions consist of a base and locking modules that feature a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant `l circuit prevents damage to the surge protective devices.

The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication,the remote signaling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed.

ADVANTAGES

• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified

ADVANTAGES

ADVANTAGES

ADVANTAGES

Model

SISO-40/F、SISO-4O/M、SISO-40/MF
SISO-40/S (customization acceptable )

APPLICABLE STANDARDS

Standard:GB/T 14048.2 GB/T 14048.1/3 GB/T18802.1
The international standard:IEC/EN60947-2 AS/NZS IEC60947.3 IEC61643-31

WORKING ENVIRONMENT

• Suitable for indoor or outdoor use
• The installation type:suitable for vertical or horizontal use
• The environment temperature:-40’C +70’C, The average value within 24h does not exceed 40°C
• The allitude:No more than 2000 m
• Pollution levels:Level 3
• Install the category: Ill Class
• Storage and transportalion:The ambient limit temperature is -25’C – +60’C.
the air relative humidity is not more than 95% when the temperature is 25°C.
and the height of free fall is not more than 50mm; ln the process of transportation.
it shall not be subjected to strong jolt. vibration and bump,
and shall be protected from rain and snow.
• Notice:AII connector used in must be IP65 waterproof or above protection level
(except indoor or installation without protection requirements).

Application

■ DIN roil mounting
■ Extremely short power shut-off time of approx. 3ms
■ 2 poles and 4 poles are available
■ IEC60947.3 standard
■ DC21 B: 16A, 25A, and 32A up to 1500V DC

ADVANTAGES

Quick Details

• Place of Origin: Zhejiang, China (Mainland)
• Brand Name: Suntree/
• Model Number: PV solar cable
• Insulation Material: XLPE
• Type: High Voltage
• Application: solar panel system
• Conductor Material: Copper
• Jacket: halogen free crosslinked polyolefin
• Product name: Suntree DC 2.5mm2 Dual Core PV Cable PV Cable approved UL ,TUV
• Color: Red/Black
• Certificate: TUV,UL
• Rated voltage: AC 600/1000V DC 1000/1800V
• Core: 1 Core/2 Core
• Cross-section: 1.5/2.5/4/6/10 mm2
• Rated temp: -40℃-+90℃
• Rated current: 20-95A
• Weathering resistance: 4.97Ω
• Finished cable o.d: 5.35+-0.1mm

ADVANTAGES

ADVANTAGES

ADVANTAGES