-
SHLX-PV4/2 DC combiner box
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SHLX-Grid-Connected Box
ADVANTAGES
• Protection rating IP65
• With short-circuit, over-voltage, under-voltage protection
• Automatically closing
• Surge protection
• Disconnect obliviously,Repair directly in box when repair power issue
• With metering installation location to visualize power -
SRD-50H DC Fuse 1500V
Main function
from Break the overload and short-circuit current generated by the current feedback, to protect solar photovoltaic device.
Application
Suitable for photovoltaic systems below 1500VDC.
-
Load Disconnect Switch
Load Disconnect Switch
- Model Number:SGL8N-2
- Certification:TVU、CE、IEC
- Rated voltage:DC1500V
- Uimp:8KA
- Poles: 1P/2P/3P/4P/6P
Main function
Mainly for isolation in the circuit
Application
Suitable for circuits below 1500VDC
cabinet/combiner box/photovoltaic system
-
SHLX-PV3 combiner box
High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified
-
SUP2-PV DC SPD 1500V
Main function
When a surge overvoltage occurs in the circuit due to a lightning strike or other reasons,the protector will be turned on immediately within nanoseconds, and the surge overvoltage will be introduced into the ground to protect the electrical equipment on the grid
Application
Suitable for circuits below 1500VDC
cabinet/combiner box/photovoltaic system -
SL7N-63 DC Circuit Breaker
DC Circuit Breaker
- Model Number:SL7N-63
- Certification:TVU、CE
- Rated voltage:DC1000V
- Short-circuit breaking capacity:6KA
- Poles: 1P,2P,3P,4P
- Rated current:10A、25A、25A、32A、50A、63A
-
SHLX-PV6/2 DC combiner box
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SL7N-63H DC Circuit Breaker 1500V
DC Circuit Breaker 1500V
- Model Number:SL7N-63H
- Certification:TVU、CE
- Rated voltage:DC1500V
- Short-circuit breaking capacity:6KA
- Poles: 2P/4P
- Rated current:10A/25A/25A/32A/40A
-
SHLX-PV6/3 DC combiner box
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SL7N-125D DC Circuit Breaker
Main function
SL7N-40H with overload delay protection, short circuit instantaneous protection, provide short-circuit protection,overload protection from the 1500VDC.
Application
Widely used in DC panel, DC distribution cabinet, DC combiner box, energy storage, photovoltaic, wind power station distribution box system, communication distribution box protection system, and can also be used for infrequent on-off conversion of lines under normal conditions.
-
SHLX-PV8/2 DC combiner box
ADVANTAGES
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SM1-PV DC breaker Non-polarity
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: SUNTREE
- Model Number: SM1-PV DC breaker
- Type: Moulded Case
- Poles Number: 4
- rated current In(A): 63A-400A DC breaker
- Ur rated operating voltage(VDC): 3P 750V 4P DC1000V
- rated insulation voltage Ui(VDC): DC1000V DC breaker
- rated impact voltage Uimp(kV): 8kV DC breaker
- Ultimate breaking capacity Icu(kV): 25kV DC breaker
- trip type: thermal-magnetic
- ambient temperature(℃): -20℃~70℃
- altitude: 2000M for DC breaker
- insulation: fixed, plug-in DC breaker
- accessories: auxiliary,alarm,shunt release,manually operated and electric operation
-
SUP2H1-PV Surge Protective Device
Application
The Cooper suntree three-module photovoltaic Surge Protective Device (SPD) (with three-step DC switching device) features visual indication and optional remote contact signaling (floating changeover contact) for use in PV systems. These complete surge protective devices are suitable for all PV systems in accordance with IEC 60364-7-712. Includes a five year limited warranty.
These pre-wired solutions consist of a base and locking modules that feature a combined disconnection and short-circuiting (shunting) device with safe electrical isolation to prevent fire damage due to DC arcs. An integrated DC fuse allows safe module replacement without arc formation. In case of insulation faults in the generator circuit, a reliable and tested fault-resistant `l circuit prevents damage to the surge protective devices.
The green and red visual indicator flags show the module protective status (green = good, red = replace). Apart from this visual indication,the remote signaling option features a three terminal floating changeover contact that can be used as a make or break contact depending on the particular monitoring system design employed.
-
SHLX-PV6/1 DC combiner box
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SRD-30 DC Fuse
ADVANTAGES
DC Fuse
- Model Number:SRD-30
- Certification:TVU、CE、IEC
- Rated voltage:DC1100V
- Short-circuit breaking capacity:33KA
- Poles: 1P
- Rated current:1,2,3,4,5,6,8,10,12,15,20,25,30A
-
SMC4Y Solar Connector
ADVANTAGES
Quick Details
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: SUNTREE
- Model Number: SMC4-CMMM-14 MC4 PV Y Type connector
- Type: Solar
- Application: solar power MC4 PV Y Type connector
- Gender: Male & Female MC4 PV Y Type connector
- Rated current: 30A
- Withstanding Voltage: 1000vdc of MC4 PV Y Type connector
- Contact Resistance: ≤0.3mΩ
- Protection class: Class II
- Temperature Range: -40 C~+90C
- Protection Degree: IP67 MC4 PV Y Type connector
- Unmating Force: 200 Newton MC4 PV Y Type connector
- Contact material: Copper,silver plated of MC4 PV Y Type connector
tuv T type/Y type MC4 connector and pv cable connector mc4
- Simple on-site processing.
- accommodates PV cable with different insulation diameters.
- Mating safety provided by keyed housings.
- Multiple plugging and unplugging cycles .
- High current carrying capacity.
- TUV and UL approved.
-
SNH2XLg PV 1100V DC 125A-400A Photovoltaic Fuse
ADVANTAGES
Applications
Standard:IEC 60269-6,GB/T 13539.6
Interrupting Capacity
30,000 Amperes At 1100V DC(Time ConsIoni: 1-3ms)DC Fuse Applications
These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays(reverse current, multi-array fault).
Benefits
A -Safety and protection
B-Simplicity of installation and use
-
SISO-40 DC isolator switch
ADVANTAGES
Features
- UV Resistant IP66 Enclosure
- Extremely Short Power Shut Off Time Of Approx.2ms
- Lid Only Removable In “off” Position
- Earth Terminal
- 1EC60947-3,AS/NZS60947.3: 2015
- DC-PV1 DC-PV2 DC-21B
- 10A To 32A UP To DC1200v
- Easy To Install
-
SHLX-PV8/1 DC combiner box
ADVANTAGES
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
Dc isolating switch waterproof bus-box
Model
SISO-40/F、SISO-4O/M、SISO-40/MF
SISO-40/S (customization acceptable )APPLICABLE STANDARDS
Standard:GB/T 14048.2 GB/T 14048.1/3 GB/T18802.1
The international standard:IEC/EN60947-2 AS/NZS IEC60947.3 IEC61643-31WORKING ENVIRONMENT
• Suitable for indoor or outdoor use
• The installation type:suitable for vertical or horizontal use
• The environment temperature:-40’C +70’C, The average value within 24h does not exceed 40°C
• The allitude:No more than 2000 m
• Pollution levels:Level 3
• Install the category: Ill Class
• Storage and transportalion:The ambient limit temperature is -25’C – +60’C.
the air relative humidity is not more than 95% when the temperature is 25°C.
and the height of free fall is not more than 50mm; ln the process of transportation.
it shall not be subjected to strong jolt. vibration and bump,
and shall be protected from rain and snow.
• Notice:AII connector used in must be IP65 waterproof or above protection level
(except indoor or installation without protection requirements). -
Single core PV Cable
ADVANTAGES
Quick Details
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: Suntree/OEM
- Model Number: PV-1*2.5 mm2
- Type: Clock
- Number of Conductors: one
- Application: solar energy system
- cross-section: 1*2.5 mm2
- Colors: black&red
- Lifetime: 25 years
- Smallest permissible bending radius: 5*D
- Temperature range: -40℃-+90℃
- Wire: class5,tinned
- Rated current: 70A
- Rated voltage: DC1800V
Application
- Dual Wall insulation, Electron beam cross-linked
- Excellent resistance to U.V., water.ozone, fluids; salt.General Weathering
- Excellent resistance to abrasion
- Halogen-free, flame retardant, low toxicity
- Excellent flexibility and strip performance
- High current carrying capacity
- TUV and UL approved
-
SNH1gPV 1000V DC 32A-160A Photovoltaic Fuse
ADVANTAGES
Application
Standard:IEC 60269-6,GB/T 13539.6
Interrupting Capacity 50,000 amperes at 1000V DC (Time Constant: 1-3 ms)
SNH1 B
Recommended fuse-base for NH 1 fuse
See Model of product: NH1BDC Fuse Applications
These fuse-links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays(reverse current, multi-array fault).
Benefits
A -Safety and protection
B-Simplicity of installation and use
-
Main Switch for DIN Rail Mounting
Application
■ DIN roil mounting
■ Extremely short power shut-off time of approx. 3ms
■ 2 poles and 4 poles are available
■ IEC60947.3 standard
■ DC21 B: 16A, 25A, and 32A up to 1500V DC -
SHLX-PV12/1 DC combiner box
ADVANTAGES
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti-dust, and anti-ultraviolet.
Strict tests for high and low temperatures are used widely.
The simple installation, the simplified system wiring, the convenient wiring
The box body is made of cold-rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin-film solar modules. The current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
Twins core PV Cable
Quick Details
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: Suntree/
- Model Number: PV solar cable
- Insulation Material: XLPE
- Type: High Voltage
- Application: solar panel system
- Conductor Material: Copper
- Jacket: halogen free crosslinked polyolefin
- Product name: Suntree DC 2.5mm2 Dual Core PV Cable PV Cable approved UL ,TUV
- Color: Red/Black
- Certificate: TUV,UL
- Rated voltage: AC 600/1000V DC 1000/1800V
- Core: 1 Core/2 Core
- Cross-section: 1.5/2.5/4/6/10 mm2
- Rated temp: -40℃-+90℃
- Rated current: 20-95A
- Weathering resistance: 4.97Ω
- Finished cable o.d: 5.35+-0.1mm
-
SHLX-PV4/1 DC combiner box
ADVANTAGES
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SL7 Polarity DC circuit breaker
Application
SL7 PV DC breaker supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already provided or not required. Devices are designed for direct current (DC) control circuit applications.
-
SHLX-PV2/1 DC combiner box
ADVANTAGES
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
Solar connector
ADVANTAGES
Quick Details
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: SUNTREE
- Model Number: Solar-CMMM-14 IP67 cable connector solar
- Type: Solar
- Application: solar power IP67 cable connector solar
- Gender: Male & Female IP67 cable connector solar
- Rated current: 30A
- Withstanding Voltage: 1000vdc of IP67 cable connector solar
- Contact Resistance: ≤0.3mΩ
- Protection class: Class II
- Temperature Range: -40 C~+90C
- Protection Degree: IP67 IP67 cable connector solar
- Unmating Force: 200 Newton IP67 cable connector solar
- Contact material: Copper,silver plated of IP67 cable connector solar
IP67 cable solar connector solar power system male and female cable connectors,solar cable connector IP67 solar
- Simple on-site processing.
- accommodates PV cable with different insulation diameters.
- Mating safety provided by keyed housings.
- Multiple plugging and unplugging cycles .
- High current carrying capacity.
- TUV and UL approved.
Solar connector Multi-Contact Connectors
Samlex’s Solar connector-2 Kit contains 1 male and 1 female solar panel connector. IP67 cable solar connector solar power system male and female cable connectors,solar cable connector IP67 solar is easy to install and uses “snap in” safety locking tabs to lock two mating
connectors, thereby avoiding unintentional disconnection. Also when IP67 cable solar connector solar power system male and female cable connectors,solar cable connector IP67 solar locked, the mating
contacts are sealed against ingress of dust and water.
Specifications are as follows
IP67 cable solar connector solar power system male and female cable connectors,solar cable connector ip67 solar
•Connectors supplied with this kit are for use with wire size AWG # 10 or AWG # 12 with
outer insulation diameter of 3 – 6 mm
•Contact diameter -4 mm
•Maximum rated current – 30 A
•Maximum system voltage – 1000 V
•Degree of ingress protection when connected and properly locked – IP67
•Temperature range 40°C to +90°C
•TUV Rheinland – type approved, UL listed.
-
SGR Series DC Fuse
ADVANTAGES
Quick Details
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: Suntree
- Model Number: SGR series PV dedicated fuse
- Usage: Low Voltage, Solar PV
- Breaking Capacity: High, 33KA
- Safety Standards: IEC
- Type: Thermal DC fuse
- Rated current: 1~100A
- Rated voltage: 1000V
- Pole: 1P
- Sample: Ok to provide
- Certificate: IEC, ROHS
- Professional manufacture: 8 Years
- Guarantee Period: 2 Years
-
SUP2H-PV Series Surge Protector
Quick Details
- Place of Origin: Zhejiang, China (Mainland)
- Brand Name: Suntree/
- Model Number: SSPD
- color: RED
- type: SUP2H-PV
- Electricity Type: DC
- Certificate: IEC,ROHS,ISO,CE
- Price: Competitive prices
- Quality Assurance: 18 Month
- Mechanical life: 10years
- Installation: Outdoor
- maximum working voltage: 250AC/30VDC
Application
SSPD surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system).These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line ( solar panel side and inverter/converter side), especially if the line routing is external and long.
High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
-
SHLX-PV1/1 DC combiner box
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified