Shop
-
Solar Mounting Rail Splice/ joiner Kit
The Solar Rail Splice is used to join Solar mounting rails together.
KSh250.00Solar Mounting Rail Splice/ joiner Kit
KSh250.00 -
Solar Panel End Clamp
Solar Panel End Clamp is for clamping the edge of a solar panel to the mounting rail, the end clamp is designed to work with our mounting rail and will work with a framed solar panel that is 35mm thick.
To bond the solar panel to the mounting rail for earthing purposes there is a grounding washer that can be fitted between the panel and the mounting rail.
KSh250.00Solar Panel End Clamp
KSh250.00 -
Solar Panel Inner/Mid Clamp
Solar Panel Inner clamp is for clamping in between panels to mount them to the rail, the clamp is designed to work with our mounting rail and will work with a framed solar panel that is 35mm thick.
To bond the solar panel to the mounting rail for earthing purposes there is a grounding washer that can be fitted between the panel and the mounting rail.
KSh250.00Solar Panel Inner/Mid Clamp
KSh250.00 -
8kw 48v Aotai
8kw 48v Aotai
Max PV INPUT- 16000 Mppt range 200-800v pv input current-18A/18A DC input 48v 190A Ac output-8000w IP66 -
ENCLOSURE BOX 12 CIRCUITS
DIN rail mounting for MCBs, isolators PG16 / PG21 knockouts Wall / pole mounted HT version -
-
-
-
-
-
-
Battery fuse with holder 100A
Copper fuse element with plated terminals Bolt-down metal strip fuse fuse holder with bolts -
Battery fuse with holder 150A- 250A
Copper fuse element with plated terminals Bolt-down metal strip fuse fuse holder with bolts -
SNH Dc battery fuse
Available: 100A, 150A, 200A, 250A 1000V High current protection -
-
Straight MC4 connectors
20 A – 30 A 1000vdc 4 mm² / 6 mm² /10 mm²PV cable Uv resistance -
-
-
-
single phase AVS
63A ~80–300 V Over-voltage, under-voltage, over-current 2 digital readings -
Three phase AVS
63A ~80–450 V 3-Phase + Neutral Over-voltage, under-voltage, over-current Din rail mounting 6 digital readings -
SUP1H‑40 )Surge Protective Device (SPD
Type 2 (T2 Poles: 4P (for 3-phase + neutral systems ~420 V AC 40kA Din rail mounting -
SCB8-63 2P 32A breaker
2p, 32A AC 250V Overload & short-circuit protection Din rail mounting IP 40 -
SCB8-63 4P 63A breaker
4p, 63A AC 400V Overload & short-circuit protection Din rail mounting IP 40 -
8 way enclosure
Pv disconnect, fuses, SPD IP66 waterproof and dustproof Wall/pole mounted PG16 / PG21 Flame-retardant and UV-resistant housing -
Veichi Single Phase 2.2 Kw hybrid Inverter
Veichi 2.2KW Solar Pump Inverter. Solar Pumping System Converts Solar Energy Directly Into Electric Energy, And then Drives Motor To Drive Water Pumps To Pump Water From Deep Wells , Rivers, Lakes, And Other Water Sources. The System, the System Consists Of Solar Panels, Solar Pump Inverter And Water Pump.
-
SHLX-PV4/2 DC combiner box
ADVANTAGES
• High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
• Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
• Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified -
SHLX-Grid-Connected Box
ADVANTAGES
• Protection rating IP65
• With short-circuit, over-voltage, under-voltage protection
• Automatically closing
• Surge protection
• Disconnect obliviously,Repair directly in box when repair power issue
• With metering installation location to visualize power -
SRD-50H DC Fuse 1500V
Main function
from Break the overload and short-circuit current generated by the current feedback, to protect solar photovoltaic device.
Application
Suitable for photovoltaic systems below 1500VDC.
-
Load Disconnect Switch
Load Disconnect Switch
- Model Number:SGL8N-2
- Certification:TVU、CE、IEC
- Rated voltage:DC1500V
- Uimp:8KA
- Poles: 1P/2P/3P/4P/6P
Main function
Mainly for isolation in the circuit
Application
Suitable for circuits below 1500VDC
cabinet/combiner box/photovoltaic system
-
SHLX-PV3 combiner box
High Reliability
With DC FUSE
With DC Surge Protection Device
With DC circuit breaker or DC load isolation switch
Strong Adaptability
IP65 design, waterproof, anti dust and anti ultraviolet.
Strict test for high and low temperature, used widely.
The simple installation,the simplified system wiring, the convenient wiring
The box body is made of cold rolled steel and other metal materials
Flexible configuration
Used for single crystal silicon solar modules, polycrystalline silicon solar modules, thin film solar modules. Current rating of the photovoltaic fuse, circuit breaker, load isolation switch is modified



































