Shop
-
Phocos Solar Charge Controllers w/ USB Charging Output
-
Product Features
- 3 battery state-of-charge LEDs
- Three-stage PWM regulation
- Load disconnect prewarning by acoustic signal
- Boost, equalization, and float charging
- USB charging output for mobile devices
-
-
Phocos Solar Charge Controller
-
Product Features
- Ideal for almost any off-grid PV application
- Same model can be used in 12 or 24 V systems (fewer components to stock)
- Fully potted PCB
- Rugged housing with corrosion-resistant screw terminals
- Simple 3-LED system status interface
- Install only requires a flathead screwdriver
- UL1741/Class I Div. 2 certified
-
-
MPPT Solar Charge Controller
-
Product Features
- Works in 12 or 24 V battery systems (auto recognition)
- Up to 98% power-conversion efficiency
- Compact footprint fits in tight spaces
- Rugged, potted design withstands vibration, dust, insects and water ingress
- Install requires only a flathead screwdriver
- Built-in low-voltage disconnect feature
- Four-stage charging ensures maximum battery lifespan
- User-selectable battery type
- Lithium battery compatible
- Programmable night light, battery type, charging voltages and discharge voltage limit (MXI accessory required)
-
-
Industrial MPPT Charge Controllers with Lighting Control
-
Product Features
- Infrared-programmable load timing feature with dimming ideal for lighting systems
- 2 years of system performance data accessible via MXI-IR interface, PC software (CISCOM)
- Up to 98% power conversion efficiency
- Up to 4-stage charging increases battery lifespan
- I/V or I/U curve sweep algorithm increases performance when panels are shaded
- Fully encapsulated anodized aluminum housing design prevents damage from corrosion, insects and dust
- 20 cm connection wire
- Compatible with 60 cell modules
- Compatible with Lithium batteries (no BMS communication)
- IP68 Ingress Protection
-
-
Phocos Industrial MPPT Solar Charge Controller with LED Driver
-
Product Features
- Three functions in one: MPPT charge controller + light timer + LED driver
- Works in 12 or 24 V systems
- Up to 30% additional power yield compared to conventional PWM controllers
- IP68 ingress protection
- Input for motion detector (PIR)
- Infrared-programmable load timing feature with dimming, which is ideal for lighting systems
- 2 year datalogging memory
- Compatible with 60 cell PV modules
- Programmable for LFP batteries with a BMS using CISCOM in expert mode
- Compatible with Lithium batteries (no BMS communication)
-
-
BlueSolar MPPT 100/30 & 100/50
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
-
SmartSolar MPPT 150/70 up to 250/100 VE.Can
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Models:12/24/36/48 Volt -
Victron SmartSolar MPPT 100/15
A solar charger gathers energy from your solar panels, and stores it in your batteries.
Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
-
Victron SmartSolar MPPT 75/15
A solar charger gathers energy from your solar panels, and stores it in your batteries.
Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
-
FRONIUS Inverter Symo 5.0-3-M triphase
- Technical data
MPPT Range: 150…800V
Start Voltage: 150V
Input Current Max: 16A / 16A
Height X Length X Depth: 645 x 431 x 204mm
Efficiency Max: 98%
MPPT Tracker: 2
Injection: Three phase
Max. Input Power: 10000W
Internet Connexion: RS485 + Ethernet + USB + Wifi
Warranty Product: 7 years
- Technical data
-
FRONIUS Inverter Symo 4.5-3-M triphase
- Technical data
- MPPT Range: 150…800V
- Start Voltage: 150V
- Input Current Max: 16A / 16A
- Height X Length X Depth: 645 x 431 x 204mm
- Efficiency Max: 98%
- MPPT Tracker: 2
- Injection: Three phase
- Max. Input Power: 9000W
- Internet Connexion: RS485 + Ethernet + USB + Wifi
- Warranty Product: 7 years
-
FRONIUS Inverter Symo 3.7-3-M triphase
- Technical data
- MPPT Range: 150…800V
- Start Voltage: 150V
- Input Current Max: 16A / 16A
- Height X Length X Depth: 645 x 431 x 204mm
- Efficiency Max: 98%
- MPPT Tracker: 2
- Injection: Three phase
- Max. Input Power: 7400W
- Internet Connexion: RS485 + Ethernet + USB + Wifi
- Warranty Product: 7 years
-
FRONIUS Inverter Symo 3.0-3-M triphase
- Technical data
- MPPT Range: 150…800V
- Start Voltage: 150V
- Input Current Max: 16A / 16A
- Height X Length X Depth: 645 x 431 x 204mm
- Efficiency Max: 98%
- MPPT Tracker: 2
- Injection: Three-phase
- Max. Input Power: 6000W
- Internet Connection: RS485 + Ethernet + USB + Wifi
- Warranty Product: 7 years
-
FRONIUS Inverter Primo 3.0-1
- Technical data
- MPPT Range: 200 – 800V
- Start Voltage: 80V
- Input Current Max: 12A / 12A
- Height X Length X Depth: 645 x 431 x 204mm
- Efficiency Max: 97.6%
- MPPT Tracker: 2
- Injection: Single phase
- Internet Connexion: RS485 + Ethernet + USB + Wifi
- Warranty Product: 7 years
-
Victron Quattro
Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.
Models:3000VA, 5000VA, 8000VA, 10000VA, 15000VA
-
Victron Phoenix Inverter
Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.
Models:3000VA – 5000VA
-
Victron MultiPlus Power Inverter & Charger
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Models:800VA, 1200VA, 1600VA, 2000VA, 3000VA, 5000VA
-
Victron Phoenix Solar Inverter 12V/800-230V
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
This Victron Phoenix Solar Inverter 12/800-230V is rated at 800 watts for 12V systems.
Developed by inverter specialists Victron for professional duty, the Phoenix range of inverters are suitable for the widest range of applications. Developed to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Using SinusMax technology allows the Phoenix to supply very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as computers and low power electric tools
-
Victron Phoenix Solar Inverter 12/350 – 230V
This Phoenix Inverter is rated at 300 watts for 12V systems.
Victron Phoenix Solar Inverter 12/350 – 230V is developed by inverter specialists Victron for professional duty, the Phoenix range of inverters are suitable for the widest range of applications. Developed to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Using SinusMax technology allows the Phoenix to supply very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as computers and low power electric tools.
-
Jinko Solar Panels Cheetah HC 60M
- 345wp
- Module Efficiency 20.45%
- PID Resistance
- 25 Year Linear Power Warranty
-
Jinko Solar Panels Cheetah HC 72M
- 410wp
- Module Efficiency 20.38%
- PID Resistance
- 25 Year Linear Power Warranty
-
Jinko Solar Panels Tiger Bifacial
- 470wp(front only) 9BB
- Efficiency 20.65%
- PID resistant
- 30 Year Linear Power Warranty
-
Jinko Solar Panel Tiger Monofacial
- 475wp 9BB
- Efficiency 21.16%
- PID resistant
- 25 Year Linear Power Warranty
-
Jinko Solar Panel Tiger Pro 72 HC Bifacial
- 535wp
- Efficiency 21.16%
- PID resistant
- 30 Year Linear Power Warranty
-
Jinko Solar Panels Tiger Pro 72HC Monofacial
- 540wp
- Efficiency 21.35%
- PID resistant
- 25 Year Linear Power Warranty
-
Jinko Solar Panels Tiger Neo 72HC-BDV
70Wp (Front only)
Efficiency 22.1%
PID resistant
30 Year Linear Power Warranty
-
Jinko Solar Panels Tiger Neo 72HC
- 575Wp
- Efficiency 22.3%
- PID resistant
- 30 Year Linear Power Warranty
-
Jinko Solar Panel – Tiger Neo 78HC-BDV
- 610Wp (Front only)
- Efficiency 21.82%
- PID resistant
- 30 Year Linear Power Warranty
-
Solinc Solar Modules 100wp – 120wp
- 100Wp – 120Wp Polycrystalline Solar Panels
- High Efficiency at 17.8%
- Comes with 72 and 60 Cell Solar Panels
- IEC Certified
- Manufacturing Processes Comply with ISO 9001: 2015 Requirements
- Manufacturing Facility Vetted by OPIC
- Advanced German Technology for Stringing and Lamination
- PID Resistant
- Improved Energy Production Even at High Temperatures
- Electroluminescence Tested to Ensure Micro-crack Free Panels
- Only Positive Tolerance – Delivers More than Rated Wattage
-
Solinc Solar Modules 150wp – 200wp
- 150Wp – 200Wp Polycrystalline Solar Panels
- High Efficiency at 17.8%
- Comes with 72 and 60 Cell Solar Panels
- IEC Certified
- Manufacturing Processes Comply with ISO 9001: 2015 Requirements
- Manufacturing Facility Vetted by OPIC
- Advanced German Technology for Stringing and Lamination
- PID Resistant
- Improved Energy Production Even at High Temperatures
- Electroluminescence Tested to Ensure Micro-crack Free Panels
- Only Positive Tolerance – Delivers More than Rated Wattage
-
Solinc Solar Modules 285wp – 345wp
- 285Wp – 345Wp Polycrystalline Solar Panels
- High Efficiency at 19.0%
- Comes with 72 and 60 Cell Solar Panels
- IEC Certified
- Manufacturing Processes Comply with ISO 9001: 2015 Requirements
- Manufacturing Facility Vetted by OPIC
- Advanced German Technology for Stringing and Lamination
- PID Resistant
- Improved Energy Production Even at High Temperatures
- Electroluminescence Tested to Ensure Micro-crack Free Panels
- Only Positive Tolerance – Delivers More than Rated Wattage
-
Victron 500VA 12-Volt 120V AC Pure Sine Wave Inverter
- This Victron Energy Phoenix Inverter allows you to power domestic equipment requiring 120-Volt AC, using leisure or automotive batteries rated at 24-Volt DC
- The pure sine wave output delivers 500VA Continuous power, 900-Watt peak power with high efficiency, 1.5-Watt draw in zero-load power ECO mode
- This inverter can be operated and monitored with computers, tablets and smartphones because of the VE.Direct communication port. Cables and dongles are sold separately
- High start-up power is used to start loads such as power converters for LED lamps or electric tools. In ECO mode, the inverter will switch to standby when the load decreases
- Employing the hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load
-
EPever UP3000-M3322 24V 220V 30A 50hz 3000W Hybrid Inverter Charger With MPPT Solar Controller
Input Voltage Range 21.6~32Vdc Output power 3000W Output Voltage 220VAC±5%,230VAC(-10%～+5%) Output mode Single Phase Working environment temperature -20℃～50℃（full input and output with no derating) Load power factor 0.2-1 (VA is less than Output Continuous Power) Distortion THD ≤ 3% (resistive load) Enclosure IP30 -
Charge controller with inverter EPSolar UPower 24V 1600W
Inverter / charge controller UPower series from EPSolar for PV / solar applications. Suitable for solar, car, boat, camping, outdoor, caravan, motorhome etc. Ideal for use in remote areas with many hours of sunshine and with a lack of reliable suppliers.
- Nominal battery voltage: 24V
- Continuous power: 1600W
- Maximum power: 4000W (short-term peak)
- Max. PV charging current: 30A
- Max. utility charging current: 30A
- compatible with Ebox Wifi for remote control and monitoring
- NOT compatible with Lithium batteries!
-
EPEVER UP1500-M3222 24v 1200w inverter charger
The UPower series is a new type of inverter/charger combined with solar & utility charging and AC output.
